Items where Author is "Ingram, JM"

Up a level
Export as [feed] Atom [feed] RSS
Group by: Item Type | No Grouping
Number of items: 12.

Article

Ghatauray, T.S., Ingram, J.M., and Holborn, P.G. (2018). A comparison study into low leak rate buoyant gas dispersion in a small fuel cell enclosure using plain and louvre vent passive ventilation schemes. International Journal of Hydrogen Energy doi: https://doi.org/10.1016/j.ijhydene.2018.08.065

Ingram, J.M., Averill, A.F., Holborn, P.G., Battersby, P., and Benson, C.M. (2018). Surface temperature generation during drop weight mechanical impact and the usefulness of dynamic thermocouple measurements for predicting impact ignition of flammable gases. Journal of Loss Prevention in the Process Industries, 55 10-18. doi: https://doi.org/10.1016/j.jlp.2018.05.015

Averill, A.F., Ingram, J.M., Holborn, P.G., Battersby, P., and Benson, C.M. (2018). Application of Bayesian methods and networks to ignition hazard event prediction in nuclear waste decommissioning operations. Process Safety and Environmental Protection doi: https://doi.org/10.1016/j.psep.2018.03.002

Benson, C.M., and Ingram, J.M. (2018). Identification of ignition sources in high pressure enriched gaseous oxygen system incidents using flow chart road map diagram methodology. Process Safety and Environmental Protection, 114 206-218. doi: https://doi.org/10.1016/j.psep.2017.12.020

Averill, A.F., Ingram, J.M., Holborn, P.G., and Battersby, P. (2017). Energy losses during drop weight mechanical impacts with special reference to ignition of flammable atmospheres in nuclear decommissioning: theory and determination of experimental coefficients for impact analysis and prediction. International Journal of Impact Engineering doi: https://doi.org/10.1016/j.ijimpeng.2017.05.019

Benson, C.M., Bishop, A.M., Ingram, J.M., Phillips, R., and Nolan, P.F. (2016). The development of a model for the prediction of polymer spontaneous ignition temperatures in high pressure enriched oxygen across a range of pressures and concentrations. Journal of Loss Prevention in the Process Industries, 44(Nov), 369-379. doi: https://doi.org/10.1016/j.jlp.2016.10.007

Ingram, J.M. (2016). Ignition of flammable atmospheres by mechanical stimuli. hazardex: Journal for Hazardous Area Environment 18-23.

Conference or Workshop Item

O'Hara, R., Holborn, P.G., Ingram, J.M., Ball, J., Rathbone, P., and Edge, R. (2018). Chemochromic Pd-V2O5 Sensors for Passive Hydrogen Detection in Nuclear Containments. Paper presented at 2018 WM Symposia, Nuclear and Industrial Robotics, Remote Systems and Other Emerging Technologies, Phoenix, Arizona, USA, 18 March 2018 - 22 March 2018. London South Bank University.

Ghatauray, T., Ingram, J.M., and Holborn, P.G. (2017). A comparison study into low leak rate buoyant gas dispersion in a small fuel cell enclosure using plain and louvre vent passive ventilation schemes. Paper presented at HYSAFE: International Conference On Hydrogen Safety, Hamburg, Germany, 11 September 2017 - 13 September 2017. London South Bank University.

O'Hara, R., Ingram, J.M., Holborn, P.G., Ball, J., Edge, R., and Rathbone, P. (2017). Characterising the performance of hydrogen sensitive coatings for nuclear safety applications. Paper presented at International Conference on Hydrogen Safety (ICHS 2017), Hamburg, Germany, 11 September 2017 - 13 September 2017. London South Bank University.

Beasley, M., Holborn, P.G., Ingram, J.M., and Maidment, G.G. (2017). Domestic Refrigerator Design -Safety Issues and Opportunities. Paper presented at The Institute of Refrigeration Event 2nd March 2017, London South Bank University, 02 March 2017 - 02 March 2017. London South Bank University.

Ghatauray, T., Ingram, J.M., and Holborn, P.G. (2016). An experimental and CFD study into the dispersion of buoyant gas using passive venting in a small fuel cell enclosure. Paper presented at IChemE Hazards 26, Edinburgh, 24 May 2016 - 26 May 2016. London South Bank University.

This list was generated on Thu Oct 18 04:07:58 2018 BST.