Items where Author is "Sattar, TP"

Up a level
Export as [feed] Atom [feed] RSS
Group by: Item Type | No Grouping
Number of items: 24.

Article

Dissanayake, M., Sattar, T.P., Lowe, S., Pinson, I., and Gan, T.H. (2018). Adaptable legged-magnetic adhesion tracked wheel robotic platform for misaligned mooring chain climbing and inspection. Industrial Robot: An International Journal doi: https://doi.org/10.1108/IR-04-2018-0074

Anvo, R., Sattar, T.P., Gan, T.H., and Pinson, I. (2018). Non-Destructive Testing Robots (NDTBOTS) for In-service Storage Tank Inspection. Journal of Mechanics Engineering and Automation, 8(3), doi: https://doi.org/10.17265/2159-5275/2018.03.001

Dissanayake, M., Sattar, T.P., Gan, T.H., Pinson, I., and Shehan, L. (2018). Design and Prototype of a Magnetic Adhesion Tracked-Wheel Robotic Platform for Mooring Chain Inspection. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering doi: https://doi.org/10.1177/0959651818774479

Khan, A., Memon, S., and Sattar, T.P. (2018). Analysing integrated renewable energy and smart-grid systems to improve voltage quality and harmonic distortion losses at electric-vehicle charging stations. IEEE Access doi: https://doi.org/10.1109/ACCESS.2018.2830187

Loukopoulos, P., Zolkiewski, G., Bennet, I., Sampath, S., Pilidis, P., Duan, F., Sattar, T.P., and Mba, D. (2017). Reciprocating compressor prognostics of an instantaneous failure mode utilising temperature only measurements. Applied Acoustics doi: https://doi.org/10.1016/j.apacoust.2017.12.003

Li, T., Sun, S., Corchado, J.M., Sattar, T.P., and Si, S. (2016). Numerical fitting-based likelihood calculation to speed up the particle filter. International Journal of Adaptive Control and Signal Processing, 30(11), 1583-1602. doi: https://doi.org/10.1002/acs.2656

Sattar, T.P., Howlader, M.O.F., and Dudley-McEvoy, S. (2016). Development of a Wall Climbing Robotic Ground Penetrating Radar System for Inspection of Vertical Concrete Structures. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10(8), 1346-1352.

Howlader, M.O.F., and Sattar, T.P. (2016). Miniaturization of Dipole Antenna for Low Frequency Ground Penetrating Radar. Progress In Electromagnetics Research C (PIER C), 61 161-170. doi: https://doi.org/10.2528/pierc15103004

Howlader, M.D.O.F., and Sattar, T.P. (2015). Finite Element Analysis based Optimization of Magnetic Adhesion Module for Concrete Wall Climbing Robot. International Journal of Advanced Computer Science and Applications, 6(8), 8-18. doi: https://doi.org/10.14569/ijacsa.2015.060802

Book Section

Howlader, M.O.F., and Sattar, T.P. (2016). Design and Optimization of Permanent Magnet Based Adhesion Module for Robots Climbing on Reinforced Concrete Surfaces. In Y. Bi, S. Kapoor, and R. Bhatia (Eds.), Intelligent Systems and Applications: Extended and Selected Results from the SAI Intelligent Systems Conference (IntelliSys) 2015 (153-171). Springer. doi: https://doi.org/10.1007/978-3-319-33386-1

Conference or Workshop Item

Sahbel, A., Abbas, A., and Sattar, T.P. (2019). System Design and Implementation of Wall Climbing Robot for Wind Turbine Blade Inspection. Paper presented at The International Conference on Innovative Trends in Computer Engineering (ITCE’2019), Aswan, Egypt, 02 February 2019 - 04 February 2019. UNSPECIFIED

Kimball, M., Amit, A., Gmerek, A., Collins, P., Wheateley, A., Shah, K., Liu, J., Dissanayake, M., Caroll, J., Plastropoulos, A., Karfakis, P., Virk, G.S., and Sattar, T.P. (2018). Mooring chain climbing robot for NDT inspection applications. Paper presented at Climbing and Walking Robots and Support Technologies for Mobile Machines CLAWAR 2018, Panama City, Panama, 10 September 2018 - 12 September 2018. London South Bank University.

Tanvir, F., Sattar, T.P., Mba, D., Edwards, G., Eren, E., and Lage, Y. (2018). Identification of fatigue damage evolution in 316L stainless steel using Acoustic Emission and Digital Image Correlation. Paper presented at MATEC Web of Conference, Poitiers Futuroscope, France, 27 May 2018 - 01 June 2018. London South Bank University. doi: https://doi.org/10.1051/matecconf/201816522007

Sattar, T.P. (2017). Non-Destructive Testing Robot Applications in Hazardous Environments. Paper presented at Robots in Society: Current Robotics, London South Bank University, London, 8th November 2017. London South Bank University.

Khan, A., Memon, S., and Sattar, T.P. (2017). Integration and management of solar energy for electric vehicle charging station. Paper presented at Solar World Congress 2017 - Innovation for the 100% renewable energy transformation, Abu Dhabi, UAE, 29 October - 02 November 2017. London South Bank University.

Al Rashed, M., Kimball, M., Vega, L., Vera, D., Soler, J., Correa, M., Garcia, A., Virk, G.S., and Sattar, T.P. (2017). Climbing Robots for NDT Applications. Paper presented at 20th International Conference on Climbing and Walking Robots and Support Technologies for Mobile Machines, CLAWAR 2017, Porto, Portugal, 11 September 2017 - 13 September 2017. London South Bank University. doi: https://doi.org/10.1142/9789813231047_0036

Dissanayake, M., Howlader, M.O.F., Sattar, T.P., Gan, T., and Pinson, I. (2017). Development of a novel crawler based robot for mooring chain climbing. Paper presented at 20th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines (CLAWAR), Porto, Portugal, 11 September 2017 - 13 September 2017. Singapore: World Scientific Publishing Co.

Anvo, R., Sattar, T.P., Gan, T., and Pinson, I. (2017). Non-destructive testing robots (NDTBOTS) for in-service storage tank inspection. Paper presented at Climbing and Walking Robots and the Support Technologies for Mobile Machines (CLAWAR), Porto Polytechnic, Portugal, 11 September 2017 - 13 September 2017. UNSPECIFIED

Sattar, T.P. (2017). Plenary keynote: Monitoring Safety Critical Infrastructure with Mobile Robots. Paper presented at 20th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, Porto, Portugal, 11 September 2017 - 13 September 2017. Singapore: World Scientific Publishing Co. Pte. Ltd.

Loukopoulos, P., Sampath, S., Plidis, P., Zolkiewski, G., Bennett, I., Duan, F., Sattar, T.P., and Mba, D. (2017). Reciprocating compressor prognostics. Paper presented at CMSM 2017 7th International Congress Design and Modelling of Mechanical Systems, Hammamet, Tunisia, 27 - 29 March 2017. London South Bank University.

Sattar, T.P. (2017). Robotics for Inspection and Decommissioning of Nuclear Power Plant. Paper presented at Presentation to Integrity Management Group, TWI Ltd, Cambridge, Cambridge, 8 February 2017. London South Bank University.

Sattar, T.P. (2016). Safeguarding Safety Critical Infrastructure with Mobile Robot Inspectors , Opportunities and Challenges. Paper presented at International Conference on Sustainable Vital Technologies in Engineering and Informatics, BUE ACE1 2016, Cairo, Egypt, 7th - 9th November 2016. London South Bank University.

Sattar, T.P., Hilton, P., and Howlader, M.O.F. (2016). Deployment of laser cutting head with wall climbing robot for nuclear decommissioning. Paper presented at 19th International Conference on Climbing and Walking Robots and Support Technologies for Mobile Machines (CLAWAR 2016), London, 12 Sep 2016 - 14 Sep 2016. London South Bank University.

Sattar, T.P. (2014). Non-destructive testing and condition monitoring with mobile wall climbing and swimming robots. Paper presented at 11th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies (CM 2014/MFPT 2014), Manchester, UK, 10th - 12th June 2014. London South Bank University.

This list was generated on Tue Dec 11 04:10:22 2018 GMT.