Items where Division is "Schools > Engineering > Mechanical and Design" and Year is 2016

Up a level
Export as [feed] Atom [feed] RSS
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | K | L | M | N | P | R | S
Number of items: 29.


Andrews, D and De Grussa, Z and Chalk, A and Bush, D (2016) The Challenges and Benefits of Developing a Sustainable and Circular Business Model for the Blinds and Shutter Industry in the UK. In: Sustainable Innovation 2016, 21st International Conference - ‘Circular Economy’ Innovation & Design', 7th – 8th November 2016, University for the Creative Arts, Epsom, Surrey, UK.


Benson, CM (2016) Report on BSN100 standards Oxygen System Safety update for BSi ACE001 committee. Technical Report. British Standards Institution. (Unpublished)

Benson, CM and Fernando-Cerezo, G and Holborn, PG and Mba, D (2016) Fire suppression systems in aircraft: Their past, present & future. Fire Investigation, 1 (3). pp. 34-41.


Chistyakov, P and Karulin, E and Marchenko, A and Sakharov, A and Lishman, B (2016) The tensile strength of saline and freshwater ice in field tests. In: IAHR International Symposium on Ice, 31 May 2016 - 03 Jun 2016, Ann Arbor, MI, USA.


Davies, GF and Maidment, GG and Paurine, A and Rutter, P and Evans, T and Tozer, R (2016) Large scale cooling using mains water. In: 12th Institute of Refrigeration Gustav Lorentzen Natural Working Fluids Conference, 21st - 24th August 2016, Edinburgh, UK.

Dowlen, C (2016) Assessment of professional competence in engineering, product design – and higher education–speculative directions for developing practice. In: International Conference on Engineering and Product Design Education, 8 - 9 September 2016, Aalborg University, Denmark.

Dowlen, C and Ledsome, C and Griffiths, B and Potter, C and Winfield, P (2016) Enhancing sustainable design - the use of national and international standards in design education. In: International Conference on Engineering and Product Design Education, 8 - 9 September 2016, Aalborg University, Denmark.

Duan, F and Elasha, F and Mba, D and Bennett, I (2016) Helicopter Main Gearbox Bearing Defect Identification with Acoustic Emission Techniques. In: IEEE International Conference on Prognostics and Health Management, 20 Jun 2016 - 22 Jun 2016, Ottawa, Canada.

Duan, F and Tee, S and Corsar, M and Healey, A and Kleine-Beek, W and Mba, D (2016) Feasibility study on using thioether as an emergency backup lubrication system on a large helicopter main gearbox. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. DOI


Elasha, F and Greaves, M and Mba, D and Duan, F (2016) A comparative study of the effectiveness of vibration and acoustic emission in diagnosing a defective bearing in a planetary gearbox. Applied Acoustics, 115. pp. 181-195. DOI


Fernandez-Cerezo, G and Benson, CM and Holborn, PG and Mba, D (2016) Challenges for the development of EFFICIENT - An Environmentally Friendly Fire Suppression System for Cargo using Innovative Green Technology. In: Institute of Fire Engineers RE16, November, 2016, Birmingham.


Gao, J and Bao, Y and Gawne, DT (2016) Microporosity and delamination mechanisms in thermally sprayed borosilicate glass coatings. Surface & Coatings Technology, 304 (25 Oct). 195 - 202. DOI

Goss, VGA (2016) Loading paths for an elastic rod in contact with a flat inclined surface. International Journal of Solids and Structures, 88-89. pp. 274-282. DOI


Howlader, MD Omar Faruq (2016) Development of a Wall Climbing Robot and Ground Penetrating Radar System for NonDestructive Testing of Vertical Safety Critical Concrete Structures. PhD, London South Bank University.

Hu, X and Bao, Y and Gawne, DT and Zhang, T (2016) Process control for thermal-spray deposition of thermoset coatings using computer simulation. Progress in Organic Coatings, 101. 407 - 415. DOI


Kellici, S and Acord, J and Vaughn, A and Power, N and Morgan, D and Heil, T and Facq, S and Lampronti, G (2016) Calixarene Assisted Rapid Synthesis of Silver-Graphene Nanocomposites with Enhanced Antibacterial Activity. ACS Applied Materials and Interfaces, 8 (29). pp. 19038-19046. DOI


Li, J and Wasley, T and Nguyen, TT and Ta, VD and Shephard, JD and Stringer, J and Smith, P and Esenturk, E and Connaughton, C and Kay, R (2016) Hybrid additive manufacturing of 3D electronic systems. Journal of Micromechanics and Microengineering, 26 (10). p. 105005. DOI

Lishman, B (2016) The friction of saline ice on aluminium. Advances in Tribology. p. 1483951. DOI


Marchenko, A and Lishman, B (2016) The influence of closed brine pockets and permeable brine channels on the thermo-elastic properties of saline ice. Philosophical Transactions A: Mathematical, Physical and Engineering Sciences, 375 (2086). DOI

Marchenko, A and Lishman, B and Wrangborg, D and Thiel, T (2016) Thermal expansion measurements in fresh and saline ice using fiber optic strain gauges and multi-point temperature sensors based on Bragg gratings. Journal of Sensors (567819). DOI

Marchenko, A and Murdza, A and Lishman, B (2016) The influence of ice structure on thermo-elastic waves in saline ice. In: IAHR International Symposium on Ice, 31 May 2016 - 03 Jun 2016, Ann Arbor, MI, USA.

Mondal, S (2016) An Overview Algorithm to Minimise Side Lobes for 2D Circular Phased Array. (05).


Nguyen, TT and Li, J and Harris, RA (2016) 3D embedded freeform electrical circuitry in metal componentry. In: Solid Freeform Fabrication (SFF) Conference, 01 August 2016, Texas, United States.


Payne, C and Doberman, D and Forkes, AD and House, J and Josephs, J and McBride, A and Mueller, A and Quilliam, R and Soares, S (2016) Insects as food and feed: European perspectives on recent research and future priorities. Journal of Insects as Food or Feed, 2 (4). pp. 269-276. DOI

Pohoryles, D and Melo, J and Rossetto, T and Fabian, M and McCague, C and Stavrianaki, K and Lishman, B and Sargeant, B (2016) Use of DIC and AE for Monitoring Effective Strain and Debonding in FRP and FRCM-Retrofitted RC Beams. Journal of Composites for Construction. DOI


Rudnev, M and Selig, JM (2016) On the use of the Klein quadric for geometric incidence problems in two dimensions. Siam Journal on Discrete Mathematics, 30 (2). 934 - 954 (21). DOI


Selig, JM (2016) Some Mobile Overconstrained Parallel Mechanisms. In: Advances in Robot Kinematics, 27 Jun 2016 - 30 Jun 2016, Grasse, France.

Selig, JM and Carricato, M (2016) Persistent rigid-body motions and Study's "Ribaucour" problem. Journal of Geometry, 108 (1). pp. 149-169. DOI

Serio, Luciana (2016) Effect of glass compositional variables on the structure and properties of phosphate glass/polyamide 11 hybrids. PhD, London South Bank University. DOI

This list was generated on Thu Feb 22 04:05:24 2018 GMT.